Typically most kayak trailers have a capacity of around two to four different kayaks at a time. The manufacturer should have a recommendation and a maximum capacity rating for the trailer. This criteria alone will give you a better idea for what you need. Some of these trailers can potentially be used as multi purpose transportation for other things such as paddle boards, bikes, canoes or even boats depending on it’s capacity.
There are many types of kayaks used in flat water and whitewater kayaking. The sizes and shapes vary drastically depending on what type of water to be paddled on and also what the paddler would like to do. The second set of essentials for kayaking is an off-set paddle where the paddle blades are tilted to help reduce wind resistance while the other blade is being used in the water. These vary in length and also shape depending on the intended use, height of the paddler, and the paddler's preference. Kayaks should be equipped with one or more buoyancy aid (also called flotation) which creates air space that helps prevent a kayak from sinking when filled with water. A life jacket should be worn at all times (also called a personal flotation device or PFD), and a helmet is also often required for most kayaking and is mandatory for white water kayaking. Various other pieces of safety gear include a whistle for signaling for help; throwing ropes to help rescue other kayakers; and, a diving knife and appropriate water shoes should used depending upon the risks the water and terrain pose. Proper clothing such as a dry suit, wetsuit or spray top also help protect kayakers from cold water or air temperatures.
"Sit on top" kayaks place the paddler in an open, shallowly-concave deck above the water level. This style is usually used for non-white water activities as most find it harder to stay inside the kayak while also preventing them from "rolling" which allows the user to upright themselves if they flip over. There are some benefits to sit on tops such as the ability for a "dry hatch" these are a compartment, that usually runs the length of the kayak, which in addition to providing more buoyancy allows for the kayaker to store various equipment in. "Sit on top" kayaks often use "through holes" which allows any water that got in the boat to make it through the deck and dry hatch to drain. "Cockpit style" involves sitting with the legs and hips inside the kayak hull with a spray deck or "spray skirt" that creates a water-resistant seal around the waist. There is a wide range of "cockpit style" boats which usually allow for more user control of the boat as they are able to push against the walls of the boat to tip in order to complete maneuvers. A common variant of "cockpit style" kayaks are "play boats" these are usually very short kayaks in which the user does tricks and maneuvers: "Inflatables" are a hybrid of the two previous configurations; these boats have an open deck, but the paddler sits below the level of the deck. These boats are often subject to more instability due to the way the boat sits higher in the water. They are often used in a more commercial setting, they are often affectionately called "Duckies". "Tandems" are configured for multiple paddlers, in contrast to the single person designs featured by most kayaks. Tandems can be used by two or even three paddlers.
Kayaks were created thousands of years ago by the Inuit, formerly known as Eskimos, of the northern Arctic regions. They used driftwood and sometimes the skeleton of whale, to construct the frame of the kayak, and animal skin, particularly seal skin was used to create the body. The main purpose for creating the kayak, which literally translates to "hunter's boat" was for hunting and fishing. The kayak's stealth capabilities allowed for the hunter to sneak up behind animals on the shoreline and successfully catch their prey.